At the beginning of the year, we delivered a SG400 to a wastewater treatment plant located in the Drome department. The idea was to advantageously replace bar screen a screw pump that was not performing satisfactorily.
Just looking at the photos below you can see the space gained.
The operator can already highlight the advantages associated with this change of equipment:
– there is no need to dry out the channel or to turn it bar screen to perform simple maintenance operations
– no water supply necessary for cleaning the grille
– no more tedious brush changes on the Archimedes screw field
– all wear parts to be monitored or replaced are located above the installation plan
– all maintenance operations do not take more than 15 minutes. Therefore, it is not necessary to stop the inflow of the effluent.
– the simplicity of our technology limits the possible number of malfunctions
We thank our client for trusting us and for allowing us to propose a completely different setup from the old one.
Technical data
Provision of a bar screen automatic
- Type SG400
- ALL INOX 304L
- Maximum flow to be treated 70m3/h
- Interference 6mm
- Depth under laying plan 900mm
Options selected
- Stainless steel baffle 304L to channel the effluent towards the grille
- Electric box FB Procédés attached to the side of the bar screen
- On-site transportation
Photos of the project
